Our Products

EMT Conduit

UL 797 · 1/2" – 4" · Hot-dip galvanized steel

Thin-wall steel conduit for commercial and industrial wiring. The most widely installed conduit type in new construction.

IMC Conduit

UL 1242 · 1/2" – 4" · Zinc-coated steel

Heavier wall than EMT, lighter than RMC. Built for exposed installations, outdoor runs, and corrosive environments.

Rigid PVC Conduit

NTE INEN 1869 · 16 – 160 mm · Tipo I & Tipo II · Autoextinguible

Rigid PVC conduit for underground telephone and electrical canalization. Type I (light) and Type II (heavy), self-extinguishing, watertight spigot-bell joints.

Flexible PVC Conduit

ABNT NBR 15465 · 20 – 50 mm · Tipo LEVE · 450/750V hasta 90°C

Flexible corrugated PVC conduit for low-voltage installations. Self-extinguishing, runs in any direction without elbow accessories. Available in 25 m and 50 m rolls.

TDP Corrugated PVC Duct

NTE INEN 2227 · 110 – 220 mm · Doble Pared · Sello Elastomérico

TDP corrugated double-wall PVC duct for underground telephone and electrical networks. Semi-rigid, watertight elastomeric seals, smooth interior reduces cable friction.

HDPE Fiber Optic Duct

NTE INEN 1740 · 40 × 34 × 3 mm · Monoduct · Biduct · Triduct

Virgin HDPE duct for underground fiber runs in single, dual, and triple configurations. Internal longitudinal ribs for low-friction pulling, laser-marked footage, rolls of 500–1000 m.

PVC Conduit Line

Heavy type · 1/2" – 1" · 3 m · Spigot-bell E/C

Heavy-type PVC conduit for runs embedded in walls and slabs. Self-extinguishing, smooth interior for easy wire pulling, solvent-cemented spigot-bell joints, 3 m lengths.

SJT Cord

300 V · 60 °C · 2×12 · 3×14 · 2×14 AWG

Flexible SJT cord with Class K soft-copper conductors and PVC insulation and jacket to UL 62. 2×12, 3×14, and 2×14 AWG on closed reels of 500 to 1,000 m.

LSOH-90+ Cable

NTP-IEC · SGS · 1.5 – 300 mm² · Libre de Halógenos · 90°C

LSOH-90+ halogen-free power cable. 99.99% pure copper, 450/750V at 90°C. Required in hospitals, schools, and public buildings where halogen-free is specified.

THW-90 BH Cable

NTP-IEC · SGS · 14 AWG – 500 MCM · 40% Menos Humos

THW-90 BH low-halogen-emission power cable. 40% less smoke and 20% less toxic gas than standard PVC. 450/750V at 90°C. For industrial and commercial use.

THHN Wire

UL 83 · 14 AWG – 1000 kcmil · Copper & Aluminum

The standard for conduit-installed building wire. Heat-resistant thermoplastic insulation with nylon jacket. Available solid and stranded.

Cat6 Cable

TIA-568.C.2 · 250 MHz · 23 AWG · UTP

Twisted-pair UTP for Gigabit Ethernet. 1000BASE-T at 100m, 10G up to 55m. Structured cabling in offices, hotels, and commercial buildings.

Cat6A Cable

TIA-568.C.2-1 · 500 MHz · 23 AWG · F/UTP & U/UTP

Augmented Category 6A for 10 Gigabit Ethernet at the full 100m channel. Shielded (F/UTP) and unshielded (U/UTP). Data centers, hospitals, enterprise cabling.

Fiber Optic Cable

OS2 · OM3 · OM4 · 6 – 96 strands

Single-mode and multimode fiber for backbone, data centers, and ISP networks. OFNR / OFNP / LSZH / direct-burial jackets. 6, 12, 24, 48, 96 strand counts.

PVC SCH 40 Pipe and Fittings

ASTM D1785 · 1/2" – 6" · 600 – 180 PSI

Pressure pipe and injection-molded fittings for cold-water lines, with a full fittings catalog through 6".

PVC Drain and Vent Pipe

NTE INEN 1374 / 2474 · 50 – 200 mm · 3 m

Sanitary drain and vent pipe with a full spigot-bell fittings catalog — traps, yees, grates, and cleanout adapters.

PP-R Thermofusion Pipe

ISO 15874-2 · PN 20 / PN 25 · 20 – 160 mm

Random polypropylene for hot and cold water. Heat-fused joints with no glue and no gasket, in the green and blue lines.

PP Threaded Pipe

ISO 13478-2 · 1/2" – 1" · 6 m

Virgin polypropylene for hot and cold service connections. Threaded joints assemble with a wrench — no fusion tool, no solvent cement.

PVC Threaded Pressure Pipe

1/2" – 2" · 420 – 200 PSI · 6 m

Threaded-joint PVC for potable water service connections at high pressure, from 420 PSI at 1/2" down to 200 PSI at 2".

HDPE PE 100 Water Pipe

PE 100 · 20 – 110 mm · 0.63 – 2.5 MPa

High-density polyethylene for potable water mains and service lines, in coils of 100 and 200 m for fewer buried joints.

Corrugated Sewer Pipe (Type B)

NTE INEN 2059 · 110 – 1325 mm · 6 m

Double-wall corrugated PVC for sewer mains. Twice the ring stiffness of solid-wall drain pipe, 50-year service life.

Subsurface Drainage Pipe

DIN 4262-1 · 110 / 160 / 200 mm · coils

Perforated corrugated PVC that controls the water table in any soil type. Buries deeper than 2.5 m, resists agrochemicals.

Polyethylene Hose (LDPE)

NTE INEN 1744 · 16 – 63 mm · 1/2" – 2"

Black LDPE hose in metric and inch sizes for general-purpose and irrigation runs, rated 36 to 125 PSI.

Insulated Bins (Fish Totes)

ANSI/NSF 2 · 185 & 264 gal · 3 models

Double-wall fish totes with polyurethane foam in the walls and lid, four-way forklift entry, and a drain plug system.

Plastic Pallets

Single-piece PE · 3 footprints · rackable

Rotational-molded polyethylene, closed or open-slot deck. Food-grade, washable, and rackable for the processing floor and cold storage.

Safety Line — Road & Traffic Control

MDPE · 8 SKUs · reflective tape

Water-filled barriers, traffic drums, tubular delineators, and channelizers for work zones, lane closures, and event channelization.

Garment Bags (MOPP)

MOPP · cal. 1.25 / 1.50 / 2 · 2" × 3" – 20" × 30"

Clear mono-oriented PP bags for apparel: flat open-top, self-adhesive (SC), and ultrasonic-sealed header bags, about 100 stock sizes.

Retail & E-commerce Bags

T-shirt · boutique · LDPE mailers in 8 sizes

T-shirt bags, die-cut boutique bags, and LDPE e-commerce mailers, with custom printing and a recycled-content option.

Film Rolls & Shrink Bags

LDPE · HDPE · virgin or recycled

LDPE and HDPE rolls, perforated or pre-cut, plus LDPE shrink bags for multipacks and MOPP tubing rolls.