Water & Drainage
Nine lines that cover the whole path water takes through a job: it arrives on a pressurized service connection, distributes hot and cold inside the building, leaves through the drain, and ends in the collector or in the ground. PP-R thermofusion and PP threaded for hot and cold water, threaded PVC pressure and SCH 40 for cold water, drain and vent to NTE INEN, Type B corrugated for sewer mains, HDPE PE 100 for potable networks, perforated subsurface drainage, and LDPE hose.
Product built to the standard each market enforces — NTE INEN, ISO, DIN, and ASTM depending on the line — from plants running ISO 9001, ISO 14001, ISO 45001, and BASC. Each card goes to its full spec page.
Water and drainage products
PP-R Thermofusion Pipe
ISO 15874-2 · PN 20 / PN 25 · 20 – 160 mm
Random polypropylene for hot and cold water, heat-fused joints with no glue, in the green and blue lines.
View product
PP Threaded Pipe
ISO 13478-2 · 1/2" – 1" · 6 m
Virgin polypropylene for hot and cold service lines. Threaded joints, 100% injection-molded fittings, no solvent cement.
View product
PVC Threaded Pressure Pipe
1/2" – 2" · 420 – 200 PSI · 6 m
Threaded-joint PVC for potable water service connections at high pressure. 420 PSI at 1/2" down to 200 PSI at 2".
View product
PVC SCH 40 Pipe and Fittings
ASTM D1785 · 1/2" – 6"
Pressure pipe and injection-molded fittings for cold-water lines, 600–180 PSI, with a full fittings catalog.
View product
PVC Drain and Vent Pipe
NTE INEN 1374 / 2474 · 50 – 200 mm
Sanitary drain and vent pipe with a full spigot-bell fittings catalog — traps, yees, grates, and cleanout adapters.
View product
Corrugated Sewer Pipe (Type B)
NTE INEN 2059 · 110 – 1325 mm · 6 m
Double-wall corrugated PVC for municipal sewer mains. Twice the ring stiffness of solid-wall drain pipe, 50-year design life.
View product
HDPE PE 100 Water Pipe
PE 100 · 20 – 110 mm · 0.63 – 2.5 MPa
High-density polyethylene for potable water mains and service lines, in coils of 100 and 200 m.
View product
Subsurface Drainage Pipe
DIN 4262-1 · 110 / 160 / 200 mm · coils
Perforated corrugated PVC that controls the water table in any soil type. Buries deeper than 2.5 m, resists agrochemicals.
View product
Polyethylene Hose (LDPE)
NTE INEN 1744 · 16 – 63 mm · 1/2" – 2"
Black LDPE hose in metric and inch sizes for general-purpose and irrigation runs, 36 to 125 PSI.
View productHow distributors buy the line
The standard each line is built to
Drain and vent to NTE INEN 1374 and 2474, sewer to NTE INEN 2059, PP-R to ISO 15874-2, PP threaded to ISO 13478-2, SCH 40 to ASTM D1785, and perforated drainage to DIN 4262-1. The actual standard for each product, not "equivalent."
One container, several lines
Pipe, fittings, and coils ride in the same container, and mix with the rest of the Voltiera portfolio. Send the list by diameter, size, and destination and we build the load around it.
Send your listMetric and imperial
The line carries metric product to INEN and ISO for Latin America and the Caribbean, and inch product to ASTM for US plumbing. Tell us the destination and we send the spec that lands there.
Request a Wholesale Quote
Tell us what you need. We come back with a firm quote with incoterms — the team that builds it is the same team that answers your questions.