Voltiera
Products/TDP Corrugated PVC Duct
PVC Duct · Official RIVAL Distributor

RIVAL TDP Corrugated Double-Wall PVC Duct

RIVAL TDP corrugated double-wall PVC duct for underground telephone, electrical, and utility networks. NTE INEN 2227 compliant, semi-rigid, with fully watertight elastomeric seal joints, nominal diameters from 110 to 220 mm in 6-meter sections — smooth interior reduces friction, crush-resistant to 40% of original diameter. Voltera is the Official RIVAL Distributor, importing direct from the factory.

The double-wall stays dry inside, and the elastomeric seals resist acids, alkalis, and salt water — the difference shows up in electrolytic soils where concrete duct banks oxidize. Voltera ships TDP duct to network operators, EPCs, and utility-infrastructure contractors across Central America, the Caribbean, and South America. Full container or mixed with rigid PVC, wire, or other electrical materials. MOQs are real, not policy. Quotes go out in firm with incoterms.

Request a Quote

TDP Duct Specifications

Standard
NTE INEN 2227
Material
Corrugated double-wall PVC
Wall type
Semi-rigid
Diameters
110 mm – 220 mm (DN, external) · 100–200 mm (DI, internal)
Length
6 m sections
Joints
Elastomeric seal — fully watertight
Crush resistance
Up to 40% of DN without cracking
Chemical resistance
Acids, alkalis, salt water
Applications
Telephone and electrical ducting · Underground networks · Civil works
Packing
Bundled · Palletized · FCL available

Available Diameters — TDP

Six nominal diameters per NTE INEN 2227. All in 6-meter useful-length sections.

Nominal Diameter (DN)Internal Diameter (DI)Useful Length
110 mm100 mm6 m
125 mm110 mm6 m
160 mm145 mm6 m
175 mm160 mm6 m
200 mm183 mm6 m
220 mm200 mm6 m

Buying TDP Corrugated PVC Duct Wholesale — FAQ

What is RIVAL TDP corrugated double-wall PVC duct and where is it used?

RIVAL TDP is a semi-rigid corrugated double-wall PVC duct for underground telephone, electrical, and utility networks. NTE INEN 2227 compliant. Diameters from 110 to 220 mm (DN external), with 100 to 200 mm internal diameter, in 6-meter useful-length sections. The smooth interior reduces friction during cable pulling and allows longer runs between vaults — fewer pull points across the system.

TDP corrugated double-wall vs rigid PVC conduit — when to use which?

Rigid PVC conduit (NTE INEN 1869) is the call for protected conduit canalization in 16–160 mm sizes — building entry points, embedded runs, and shorter underground segments. TDP corrugated double-wall is the call for primary telecom and electrical ducting between vaults — larger diameters (110–220 mm), semi-rigid behavior that handles ground movement, and elastomeric seals at every joint. They are complements, not substitutes — most networks use both.

What diameters does Voltera carry (110–220 mm)?

Six standard nominal diameters per NTE INEN 2227: 110, 125, 160, 175, 200, and 220 mm. All in 6-meter useful-length sections. Diameters can mix in a single container without per-SKU minimum.

Are the elastomeric seal joints fully watertight?

Yes. The elastomeric seal at every joint is fully watertight — the duct system stays dry inside even under saturated soil or high water table. The double-wall construction also prevents water ingress through the wall itself. That dry duct is what protects the cables inside from corrosion and reduces failure rate over decades of service.

Does the duct resist corrosion in electrolytic soils?

Yes. PVC is immune to corrosion from acids, alkalis, and salt water. In electrolytic soils where concrete duct banks oxidize and deteriorate over time, TDP keeps performing — which is the main reason network operators in coastal Caribbean and salt-air environments specify PVC over concrete.

What does NTE INEN 2227 require?

NTE INEN 2227 is the Ecuadorian standard for PVC duct used in telephone and electrical networks. It defines the corrugated double-wall geometry, dimensional tolerances, crush resistance (up to 40% of DN without cracking), elastomeric seal requirements, and chemical resistance. The standard reflects what works in the field. We deliver the certificate and lot-level traceability with the shipment.

Does Voltera export TDP duct to Central America and the Caribbean?

Yes. Voltera is the Official RIVAL Distributor and ships TDP duct to network operators, EPCs, and utility-infrastructure contractors across Central America (Guatemala, Honduras, El Salvador, Costa Rica, Panama), the Caribbean (Dominican Republic, Jamaica, Trinidad & Tobago), and South America (Colombia, Ecuador, Peru, Chile, Argentina). Full container or mixed with rigid PVC, wire, or other electrical materials.

What is the minimum order to buy TDP duct wholesale by the container?

No fixed minimum. The honest question is whether the math works for a full container or whether a mixed container with rigid PVC, wire, or other electrical materials gets to a better landed cost. Send the diameters and quantities by destination — we put together the configuration that gives the best total cost.

Request a Wholesale Quote

Tell us what you need. We come back with a firm quote with incoterms — the team that builds it is the same team that answers your questions.