Cat6A Cable — Direct Import
Augmented Category 6A cable for 10 Gigabit Ethernet at the full 100 m channel. 500 MHz bandwidth, 23 AWG conductor, available unshielded (U/UTP) and foil-shielded (F/UTP). TIA-568.C.2-1 compliant, with ANEXT and AFEXT alien-crosstalk testing. The forward-looking spec for data centers, healthcare, trading floors, and any enterprise build that needs 10G at distance.
TIA-942 calls for Cat6A on data center horizontal cabling — Cat6 is not an option at 10G over 100 m. Voltera ships Cat6A to EPCs, specialty distributors, and data center buyers across the Caribbean, Central America, and South America in 1,000 ft pull boxes and bulk spools. Full container or mixed with Cat6, fiber, or other electrical materials. MOQs are real, not policy. Quotes go out in firm with incoterms.
Request a QuoteCat6A Cable Specifications
Cat6A Shielded (F/UTP) vs Unshielded (U/UTP)
The choice between U/UTP and F/UTP comes down to the install environment and whether the project can ground a shield correctly at both ends.
- +Larger OD to control alien crosstalk
- +No shield grounding required
- +Simpler installation
- +For low-EMI environments
- +Overall foil shield for EMI protection
- +Requires shielded connectors and patch panels
- +Proper grounding required at both ends
- +For high-EMI or noisy environments
Buying Cat6A Cable Wholesale — FAQ
What is Cat6A cable and where is it used?
Cat6A is the Augmented Category 6 spec for structured cabling that supports 10 Gigabit Ethernet at the full 100-meter channel. 500 MHz, 23 AWG, with alien-crosstalk controls (ANEXT and AFEXT) and tighter manufacturing tolerances. TIA-568.C.2-1. It is specified in data centers, hospitals with medical imaging, trading floors, and modern enterprise buildings where 10G at distance is a design requirement.
When do you actually need Cat6A instead of Cat6?
When the project specifies 10GBASE-T at the full 100 m channel, Cat6 is not an option — TIA-942 says Cat6A for data center horizontal cabling, and EN 50173-5 backs it up. Cat6 caps out at 10G to ~55 m. If the spec is 10G at distance, Cat6A is the only one of the two that meets it. For Gigabit-only buildings, Cat6 is still the right cost-benefit pick.
F/UTP (shielded) vs U/UTP (unshielded) — when do you choose which?
Both are valid. U/UTP Cat6A uses a larger conductor geometry and a tighter twist to control alien crosstalk without a shield — easier to install and terminate. F/UTP adds an overall foil shield for environments with high EMI (motor rooms, near VFDs, packed riser shafts). F/UTP requires proper grounding of the shield at both ends and shielded jacks and patch panels. Tell us the install environment and we recommend.
Does Cat6A require bigger conduit than Cat6?
Yes. Cat6A has a larger outside diameter than Cat6, especially shielded F/UTP. The NEC ceiling for a single conductor in a conduit is 53% fill, and Cat6A bundles hit that ceiling faster. Plan conduit sizing in the design phase, not at the install — pulling Cat6A through conduit sized for Cat6 is how a job runs over schedule.
CMR or CMP — which jacket type for Cat6A?
CMR (riser) is the most common, for vertical runs in dedicated cable shafts. CMP (plenum) is required by code in plenum return-air spaces — typically the above-ceiling environment in modern commercial buildings. The local code dictates which one is allowed; specify the application in the RFQ.
What does ANEXT / AFEXT mean and why does Cat6A test for it?
ANEXT (Alien Near-End Crosstalk) and AFEXT (Alien Far-End Crosstalk) measure interference between adjacent cables in the same bundle. At 10G speeds, that bundle-level interference is the limiting factor — not the pair-to-pair crosstalk inside one cable. Cat6A is the first category that tests and enforces it, which is why bundle density and cable separation matter on Cat6A pulls in a way they don't on Cat6.
Is your Cat6A pure copper, lot-traceable, and channel-certified?
Yes. Pure copper conductors, factory-tested to TIA-568.C.2-1, with lot traceability provided to EPCs and institutional buyers who need it for the AHJ, the inspector, or the warranty paperwork. We do not stock CCA cabling — at Cat6A speeds it would not pass channel certification.
What is the minimum order to buy Cat6A wholesale by the container?
No fixed minimum. The honest question is whether the math works for a full container of Cat6A or whether a mixed container with Cat6, fiber, or other electrical materials gives a better landed cost. Send the variants (U/UTP or F/UTP), jacket (CMR or CMP), packaging, and destination — we put together the configuration that gives the best total cost.
Standards & References
Request a Wholesale Quote
Tell us what you need. We come back with a firm quote with incoterms — the team that builds it is the same team that answers your questions.